Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0t6ORa-0000HMC; Fri, 20 Oct 95 15:53 CDT |
Encoding: |
32 TEXT |
Old-Return-Path: |
<miso!gegpo5.geg.mot.com!p03538> |
Date: |
Fri, 20 Oct 95 13:13:00 MST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Sat Apr 27 15: |
09:54 1996 |
TO: |
|
Return-Path: |
|
Resent-Message-ID: |
<"F9D642.0.PIB.An0Ym"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
X-Mailer: |
Microsoft Mail V3.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
IPC- RF-245 for rigid flexes and IPC- FC-250 for single and double sided
If your system requires it you may be required to list the material specs
IPC-FC-231B,IPC-FC-232B,IPC-FC-233A and IPC-FC-241B (these revisions may
have changed)
----------
>From: ipc!ipc.org!TechNet-request
>To: TechNet
>Subject: Flex Circuit Specs
>Date: Friday, October 20, 1995 12:21PM
>
>
>What is the equivalent spec. for flex circuits that IPC-RB-276 is for
>rigid printed boards?
>
>Also, what other IPC specs should be called out on the fab drawing?
>
>Thanks in advance:
>
>--------------------------------------
>Larry L. Pucket
>Sandia National Labs.
>Dept. 2784 MS/0624
>P.O. Box 5800
>Albuquerque, NM 87185-0624
>
>Email:
>Phone: (505) 844-1711
>Fax: (505) 844-7428
>
>
|
|
|