Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0sygk6-0000HkC; Fri, 29 Sep 95 09:48 CDT |
Old-Return-Path: |
|
Date: |
Thu, 28 Sep 1995 21:31:53 -0400 |
Precedence: |
list |
X-Loop: |
|
Message-ID: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
|
Resent-Message-ID: |
<"HY0rD1.0.R93.JS0Rm"@ipc> |
Subject: |
|
From: |
|
Resent-From: |
|
Resent-Sender: |
|
From [log in to unmask] Sat Apr 27 14: |
54:48 1996 |
Parts/Attachments: |
|
|
I manage a small (6,000 sq ft per week) captive shop that makes .062 thick
double sided plated-thru-hole boards for in-house use. We have had some good
results utilizing outside consultants to keep us current on technology and
address process problems/improvements. We are currently seeking a strong
"nuts and bolts" consultant to continue our improvement and possibly change
our slightly unique technology to a more common SMOBC one. We are not
interested in the extremes of a "sledgehammer fixit type" nor a "pure
theorist". A production experienced, educated practical person with a
network of professionals to draw upon is what we desire. Must be able to
travel to the Spokane, Washington area about once a week for a while. If you
fill these requirements and are interested, please leave me a VERY brief
note, and I will contact you. thanks, CB
|
|
|