 
| Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0sv2pA-0000MpC; Tue, 19 Sep 95 08:35 CDT |
| Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
| Old-Return-Path: |
|
| Date: |
Tue, 19 Sep 1995 07:03:17 +0800 (SST) |
| Precedence: |
list |
| From [log in to unmask] Sat Apr 27 14: |
50:36 1996 |
| Message-ID: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| X-Status: |
|
| Resent-Sender: |
|
| Resent-Message-ID: |
<"G_7482.0.SOD.lRiNm"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| In-Reply-To: |
|
| Resent-From: |
|
| cc: |
|
| Parts/Attachments: |
|
|
Does anybody has experience in using anode diaphragm shield in
the acid copper plating tank, ie. laying a whole piece of PP mesh cloth
supported by a frame of PP block across the length of the tank on both
sides of the tank with the anode baskets contained in the anode
compartments so formed... in this way, there is no need to use anode bag
for each basket.... any comments?
B.H. Lee
Process Engineer
|
|
|
