 
| Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0s8vrd-0000GlC; Tue, 9 May 95 15:26 CDT |
| Old-Return-Path: |
<miso!knox.pcec.philips.com!martint> |
| Date: |
Tue, 9 May 95 15:42:59 EDT |
| Precedence: |
list |
| Resent-From: |
|
| From [log in to unmask] Thu Apr 25 15: |
26:58 1996 |
| Cc: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| Resent-Message-ID: |
<"Fq_y12.0.7w9.__yhl"@ipc> |
| Subject: |
|
| From: |
|
| Resent-Sender: |
|
| X-Loop: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
I have ANSI Y32.2-1975/CSA Z99-1975/IEEE Std 315-1975, "Graphic Symbols for
Electrical and Electronic Diagrams," Supplimented by ANSI/IEEE Std 315A-1986,
both published by:
IEEE,Inc.
345 East 47th St.
New York, NY
10017
Hopefully you can find something a little more current but this should
give you a starting point.
Tom Martin, PC Board Designer
Dept 681
Philips Consumer Electronics Co.
P.O.Box 14810
Knoxville, TN 37914-1810
USA
(615) 521-4785
FAX (615) 521-3650
INTERNET = [log in to unmask]
----- Begin Included Message -----
>From [log in to unmask] Tue May 9 15:20:13 1995
Resent-Date: Tue, 9 May 1995 21:19:44 +0200
Old-Return-Path: <miso!emc.com!gnieski>
To: [log in to unmask]
Resent-Message-Id: <"Vq82p.0.GW8.4uwhl"@ipc>
Resent-From: [log in to unmask]
Subject: Unidentified subject!
X-Mailing-List: <[log in to unmask]> archive/latest/483
X-Loop: [log in to unmask]
Resent-Sender: [log in to unmask]
Content-Length: 211
X-Lines: 9
Is there any national standard or IPC standard for
making electronic symbols for CAD systems and schematics ?
Also, does the IPC have or plan to have a web page on
the internet ?
Mike Gnieski
[log in to unmask]
----- End Included Message -----
|
|
|
