TECHNET Archives

1995

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipchq.com (Smail3.1.28.1 #2) id m0sqqKy-0000GmC; Thu, 7 Sep 95 18:26 CDT
Old-Return-Path:
<miso!mcimail.com!AndrewPM_+a_Rogers-M_+lAndrew_P_Magee+r%ROGERS_CORPORATION>
Date:
Thu, 7 Sep 95 18:09 EST
Precedence:
list
Resent-From:
Resent-Sender:
X-Status:
X-MB-Info:
v1.10G | mci6es5er05
X-Mailing-List:
<[log in to unmask]> archive/latest/1047
TO:
TechNet <[log in to unmask]>, Steve Joy <[log in to unmask]>
Return-Path:
Resent-Message-ID:
<"W1LMo3.0.qT7.R-tJm"@ipc>
Subject:
From:
Andrew P Magee <[log in to unmask]>
Status:
O
X-Loop:
From [log in to unmask] Sat Apr 27 14:
44:15 1996
Message-Id:
Parts/Attachments:
text/plain (41 lines)


     We have a customer with this capability.

     Lenthor Engineering
     1506 Gladding Court
     Milpitas, CA 95035

     Tel: (408) 945-8787
     Fax: (408) 945-0347

     Contact: Jerry Smith



     There are quite a few mil-spec shops that could do this for you.

     Andrew P. Magee - Applications Engineer
     Rogers - Circuit Materials Unit
     Tel: (602) 917-5237
     Fax: (602) 917-5256
     E-Mail: 7403202@mcimail


______________________________ Reply Separator _________________________________
Subject: Rigid Flex Referral
Author:  StephenJ (Steve Joy) {NAME:Steve
Joy|EMS:INTERNET|MBX:[log in to unmask] at MCIMAIL
Date:    9/7/95 1:21 PM


I am looking for a shop that is capable of building a rigid flex with the
following criteria:  10 layers/L4-5 flex; .003/.003" on the flex;
005/.005" on the epoxy; ~2000 holes- mostly .0135"; about 9" X 14" with
3 flex legs off the main board.

Thanks,
Steve Joy



ATOM RSS1 RSS2