Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0s75bj-0000H1C; Thu, 4 May 95 13:26 CDT |
Sender: |
|
Old-Return-Path: |
<miso!gac.usa.com!HYBISKE> |
Date: |
Thu, 04 May 1995 14:00:56 |
Precedence: |
list |
Resent-From: |
|
From [log in to unmask] Thu Apr 25 15: |
25:25 1996 |
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
|
Resent-Message-ID: |
<"AF_ak1.0.kwA.NnHgl"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
X-mhsfile: |
$T107211 |
Message-Id: |
|
Parts/Attachments: |
|
|
At General Atronics, we use Zuken-Redac "Visula" CAD systems to
design our Printed Circuit Boards. The system can analyze crosstalk,
can calculate line-loss, impedance, and also give thermal analysis.
In order to use this resource, I need to input several properties
that I can't seem to find on product bulletins from laminate
manufacturers. They are:
Electrical Conductivity (in Siemens (same as Moh) per meter)
Relative Permeability
Thermal Conductivity (value in watts per meter per K)
Specific Heat (in Joules per K per kilogram)
If anybody out there can help, I would greatly appreciate it. Thanks.
Tom Hybiske
General Atronics Corp.
1200 East Mermaid Lane
Wyndmoor, PA 19038
215-242-7310 (voice)
213-233-9947 (fax)
|
|
|