Hi Jodi-
Always a bit of a sticky issue, but it shouldn't be.
The stress should be the highest stress you can put on it with a good
"factor of safety" backoff so the test won't damage good cables. You want
to be able to "shake out" inadvertent manufacturing defects which barely
get you out of failing a simple functional test.
Ideally you would have enough data on good and bad cables to have a
probability curve so you can choose an optimum, but practically if you're
going no higher than half the rated peak voltage and are at least 4 times
the expected working voltage you will probably fine.
Wayne THayer
On Thu, Aug 6, 2020 at 3:42 AM Jodi Sanchez <[log in to unmask]> wrote:
> Good Morning
> I would like to ask your thoughts about hipot settings and how do you
> determine what is the best setting for hipot testing. We have some
> engineers who have me set the test to 500VDC at 100 mOhm for 1 sec. This
> seems high and excessive to me . This particular cable is an RJ45 to RJ45.
> Can I get your thoughts on hipot settings ?
>
> Jodi Sanchez
>
> On Wed., Aug. 5, 2020, 9:13 p.m. Bhanu Sood, <[log in to unmask]> wrote:
>
> > Thanks for the intro Jodi. This is a great forum to pose your questions,
> > and you shall receive answers, but what is unique about the forum is the
> > types of responses you will receive. Not everyone agrees, the views are
> > often divergent (backed by firm conviction in their POV and decades of
> > experiences).
> > Welcome!
> >
> > On Wed, Aug 5, 2020 at 8:35 PM Jodi Sanchez <[log in to unmask]>
> wrote:
> >
> > > Let me introduce myself. My name is Jodi. I am prototype lead engineer
> .
> > I
> > > am also a CIT . I have 15 years experience in cable assembly . We do
> alot
> > > of Military and Medical cable assemblies. We have amazing capabilities
> > and
> > > I love what I do. I am passionate about my work and I must say although
> > it
> > > is caios sometimes . I enjoy and love what I do. Sometimes we are faced
> > > with challanges but I have never got a print or job that we could not
> > > figure out. Everything looks easy on a flat pc of paper. Some of the
> ones
> > > that look the easiest turn out to be the hardest to build. I would like
> > to
> > > learn more as my mind is like a sponge. I want to better myself and
> > better
> > > my company. Thanks for having me .
> > >
> > > Jodi Sanchez
> > >
> > > On Wed., Aug. 5, 2020, 4:37 p.m. Douglas Pauls, <
> > > [log in to unmask]> wrote:
> > >
> > > > Scott,
> > > > We should start a pool on how long it takes before Jodi says "get me
> > away
> > > > from these lunatics".
> > > >
> > > > *Douglas Pauls *| Principal Materials and Process Engr | Advanced
> > > > Operations Engineering
> > > >
> > > > *COLLINS AEROSPACE*
> > > >
> > > > 400 Collins Road NE, MS 108-101, Cedar Rapids, IA 52498 USA
> > > >
> > > > *Tel:* +1 319 295 2109 | *Mobile: *+1 319 431 3773
> > > >
> > > > [log in to unmask]
> > > >
> > > > [log in to unmask] for all Export Compliant Items
> > > >
> > > >
> > > > On Wed, Aug 5, 2020 at 3:24 PM Decker, Scott Collins <
> > > > [log in to unmask]> wrote:
> > > >
> > > > > Hi Jodi,
> > > > > If you are referring to the TechNet program, too late, you are
> in
> > > it
> > > > > now.... :-) Welcome!
> > > > >
> > > > >
> > > > > Scott Decker | Senior Engineer, PCB Design Services CID+ |
> Electronic
> > > > > Systems Center
> > > > > COLLINS AEROSPACE
> > > > > 3445 S. 5th Street, Suite 170, Phoenix, AZ 85040 U.S.A.
> > > > > Tel: 602 308 5957 FAX: 602 243 2347
> > > > > [log in to unmask] www.collinsaerospace.com [
> > > collinsaerospace.com
> > > > ]
> > > > > KE7MWT
> > > > > CONFIDENTIALITY WARNING: This message may contain proprietary
> and/or
> > > > > privileged information of
> > > > > Collins Aerospace Systems and its affiliated companies. If you are
> > not
> > > > the
> > > > > intended recipient please 1) do not disclose, copy,
> > > > > distribute or use this message or its contents, 2) advise the
> sender
> > by
> > > > > return e-mail, and 3) delete all copies (including all
> > > > > attachments) from your computer. Your cooperation is greatly
> > > appreciated.
> > > > >
> > > > > -----Original Message-----
> > > > > From: TechNet [mailto:[log in to unmask]] On Behalf Of Jodi Sanchez
> > > > > Sent: Wednesday, August 5, 2020 1:20 PM
> > > > > To: [log in to unmask]
> > > > > Subject: [External] [TN] How do I enroll
> > > > >
> > > > > Hello
> > > > > Can you tell me how I can enroll in this program
> > > > >
> > > > > --
> > > > >
> > > > > Jodi Sanchez
> > > > >
> > > > >
> > > > > *Prototype Lead Engineering Technician*
> > > > >
> > > > > *Cable Manufacturing *
> > > > >
> > > > > [log in to unmask]
> > > > >
> > > > > 860 779.4339
> > > > >
> > > > > Dayville CT USA
> > > > >
> > > >
> > >
> >
>
|
