TECHNET Archives

February 2020

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Contact lubrication on edge connectors
From:
Eva J <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Eva J <[log in to unmask]>
Date:
Thu, 6 Feb 2020 17:08:54 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (30 lines) 
*TechNet and Raye,*

*DeoxIT®*
https://caig.com/deoxit-d-series/

Evamaria Jones
Circuit Technology Inc.
MIT J-STD-001 /  MIT IPC-A-610
MIT IPC-A-620 /  CIT 7711&7721
CID Certified Interconnect Designer
540-522-6006


On Thu, Feb 6, 2020 at 4:16 PM Rivera, Raye <[log in to unmask]> wrote:

> Hello Technetizens,
>
> I'm investigating whether it makes sense to apply a connector lubricant to
> gold fingers on DIMM connectors and riser cards.  These are all small PCBs
> that plug into an edge connector with gold-plated contacts. The hope is to
> prevent those annoying failures that are "fixed" by removing and reseating
> the DIMM or riser card.
>
> Does anyone have either experience with or advice on connector lubricants
> they would care to share?
>
> Best regards,
> Raye Rivera
>

ATOM RSS1 RSS2