Hi Steve,
Thanks for giving me that! I spoke with a gentleman named George and he
hooked me right up. They aren't cheap, a pair of them is $170, but they are
needed to clamp the PCB in place, and if they are bent upwards or have a
creases bent in them, you can wind up printing twice the thickness of paste
(or more) on components that are right at the edges of the board. The part
number to ask for if anyone else needs them is: 1014399
Steve
On Thu, Dec 6, 2018 at 12:17 PM Vargas, Stephen M <[log in to unmask]>
wrote:
> Steve:
>
> Agreed, I always used gloves when in the machine. If they don’t have
> the clamps, ask MPM if the clamp strips used on the MPM100 machines may
> work, they look very similar.
>
>
>
> Regards,
>
> Steve Vargas
>
>
>
> *If you don't have time to do it right, when will you have time to do it
> over? *
>
> *John Wooden*
>
>
>
> Polaris Contract Mfg Inc
>
> 15 Barnabas Rd
>
> Marion, MA 02738
>
> 774-553-6192
>
> [log in to unmask]
>
>
>
> P Please consider the environment before printing this e-mail
>
>
>
> *From:* Steve Gregory [mailto:[log in to unmask]]
> *Sent:* Thursday, December 06, 2018 2:12 PM
> *To:* Vargas, Stephen M (US) <[log in to unmask]>
> *Cc:* [log in to unmask]
> *Subject:* Re: EXTERNAL: [TN] MPM Ultraprint 2000 HIe conveyor clamp
> strips
>
>
>
> Thanks Steve!
>
>
>
> Just called them and spoke with George, he knows just what I'm talking
> about and he's going to look for me and let me know. Those things can be
> dangerous if you don't know about them! They'slice you like a razor if
> you're careless around them.
>
>
>
> Steve
>
>
>
> On Thu, Dec 6, 2018 at 11:58 AM Vargas, Stephen M <
> [log in to unmask]> wrote:
>
> Steve:
>
> Try Precision Placement Machines Inc. Good luck.
>
> http://www.goppm.com/
>
> Regards,
> Steve Vargas
>
> If you don't have time to do it right, when will you have time to do it
> over?
> John Wooden
>
> Polaris Contract Mfg Inc
> 15 Barnabas Rd
> Marion, MA 02738
> 774-553-6192
> [log in to unmask]
>
> P Please consider the environment before printing this e-mail
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
> Sent: Thursday, December 06, 2018 1:51 PM
> To: [log in to unmask]
> Subject: EXTERNAL: [TN] MPM Ultraprint 2000 HIe conveyor clamp strips
>
> Hi All,
>
> We have a MPM Ultraprint 2000 HIe printer (yeah it's old) that has those
> thin stainless steel clamp strips (I think that's what they're called) that
> go along the conveyor where the board loads into the table. I looked for
> them in the Illustrated parts breakdown and couldn't find them in the
> manual we have. Ill try to share the photo from Google images that shows
> what I'm talking about:
>
>
> https://photos.google.com/share/AF1QipM-njL9RIJIZIZlYe9yGZbKn9gz7_8nVbzE7YngWjBdO6UwApeb_ng5I75hyiD7dw?key=bXl5X3FsRVZwR013SGNCTEt6N3I1eWFwSGY2Q0RB
>
> The ones on our printer have been absolutely beat to death and I'm trying
> to find some. Does anyone know where I might look to find these?
>
> Thanks in advance!
>
> Steve
> --
> Steve Gregory
> Kimco Design and Manufacturing
> Process Engineer
> (208) 322-0500 Ext. -3133
>
> --
>
>
>
> This email and any attachments are only for use by the intended
> recipient(s) and may contain legally privileged, confidential,
> proprietary or otherwise private information. Any unauthorized use,
> reproduction, dissemination, distribution or other disclosure of the
> contents of this e-mail or its attachments is strictly prohibited. If you
> have received this email in error, please notify the sender immediately
> and delete the original.
>
>
>
>
> --
>
> Steve Gregory
>
> Kimco Design and Manufacturing
>
> Process Engineer
>
> (208) 322-0500 Ext. -3133
>
>
>
>
>
> This email and any attachments are only for use by the intended
> recipient(s) and may contain legally privileged, confidential, proprietary
> or otherwise private information. Any unauthorized use, reproduction,
> dissemination, distribution or other disclosure of the contents of this
> e-mail or its attachments is strictly prohibited. If you have received this
> email in error, please notify the sender immediately and delete the
> original.
>
--
Steve Gregory
Kimco Design and Manufacturing
Process Engineer
(208) 322-0500 Ext. -3133
--
This email and any attachments are only
for use by the intended
recipient(s) and may contain legally privileged,
confidential, proprietary
or otherwise private information. Any
unauthorized use, reproduction,
dissemination, distribution or other
disclosure of the contents of this
e-mail or its attachments is strictly
prohibited. If you have received
this email in error, please notify the
sender immediately and delete the
original.
|