The tape and reel standard is EIA 481. I would suspect it contains the
labeling criteria but don't know for certain.
Dave Hillman
Rockwell Collins
[log in to unmask]
On Tue, Sep 11, 2018 at 12:27 PM, Stadem, Richard D <
[log in to unmask]> wrote:
> J-STD-033 has that information. We make our own "reel labels" for use when
> the reels are removed from their original (MSD-Labeled) packaging.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of
> [log in to unmask]
> Sent: Tuesday, September 11, 2018 11:55 AM
> To: [log in to unmask]
> Subject: [TN] Vendor Reel Parts Marking
>
> Fellow TechNetters:
>
> Is there an IPC STD and/or Industry Bench mark that address how the
> vendor reel part container should be label. Also the reel itself in the
> event that the same parts is offered in a variety of gold plating
> thicknesses.
>
> Victor,
>