Sender: |
|
X-To: |
|
Date: |
Wed, 29 Aug 2018 22:00:38 +0200 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
quoted-printable |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Just in advance, it seems IPC-9241 does not mention about Back Plating...
Gabriele
-----Messaggio originale-----
Da: TechNet [mailto:[log in to unmask]] Per conto di Stadem, Richard D
Inviato: mercoledì 29 agosto 2018 21:36
A: [log in to unmask]
Oggetto: Re: [TN] Thin gold cross section measurement
There is an excellent IPC standard, IPC-9241 Guidelines for Microsection
Preparation, but I cannot remember if it discusses Back Plating and I do not
have a copy here in front of me. When I get back Monday I will check.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of
[log in to unmask]
Sent: Wednesday, August 29, 2018 1:53 PM
To: [log in to unmask]
Subject: [TN] Thin gold cross section measurement
Importance: High
Fellow TechNetters:
Is there an IPC Standard and/or guideline line which stats or recommend
that if thin gold plating is to be measured by cross section then Back
Plating Process should be conducted.
Victor,
---
Questa e-mail è stata controllata per individuare virus con Avast antivirus.
https://www.avast.com/antivirus
|
|
|