TECHNET Archives

August 2018

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
X-To:
TechNet E-Mail Forum <[log in to unmask]>, "[log in to unmask]" <[log in to unmask]>
Date:
Wed, 29 Aug 2018 19:35:35 +0000
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, "Stadem, Richard D" <[log in to unmask]>
Message-ID:
<[log in to unmask]>
Subject:
Re: Thin gold cross section measurement
From:
"Stadem, Richard D" <[log in to unmask]>
MIME-Version:
1.0
In-Reply-To:
<[log in to unmask]>
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="us-ascii"
Parts/Attachments:
text/plain (16 lines) 
There is an excellent IPC standard, IPC-9241 Guidelines for Microsection Preparation, but I cannot remember if it discusses Back Plating and I do not have a copy here in front of me. When I get back Monday I will check.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of [log in to unmask]
Sent: Wednesday, August 29, 2018 1:53 PM
To: [log in to unmask]
Subject: [TN] Thin gold cross section measurement
Importance: High

Fellow TechNetters:

   Is there an IPC Standard and/or guideline line which stats or recommend that if thin gold plating is to be measured by cross section then Back Plating Process should be conducted.


Victor,

ATOM RSS1 RSS2