Sender: |
|
X-To: |
|
Date: |
Wed, 29 Aug 2018 16:29:46 -0400 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
quoted-printable |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="ISO-8859-1"; delsp=yes; format=flowed |
MIME-Version: |
1.0 (Apple Message framework v753.1) |
Parts/Attachments: |
|
|
does ipc-4552A got anything (prf spec fro ENIG plating) ?
jk
On Aug 29, 2018, at 4:00 PM, SALA GABRIELE wrote:
> Just in advance, it seems IPC-9241 does not mention about Back
> Plating...
>
> Gabriele
>
> -----Messaggio originale-----
> Da: TechNet [mailto:[log in to unmask]] Per conto di Stadem, Richard D
> Inviato: mercoledì 29 agosto 2018 21:36
> A: [log in to unmask]
> Oggetto: Re: [TN] Thin gold cross section measurement
>
> There is an excellent IPC standard, IPC-9241 Guidelines for
> Microsection
> Preparation, but I cannot remember if it discusses Back Plating and
> I do not
> have a copy here in front of me. When I get back Monday I will check.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of
> [log in to unmask]
> Sent: Wednesday, August 29, 2018 1:53 PM
> To: [log in to unmask]
> Subject: [TN] Thin gold cross section measurement
> Importance: High
>
> Fellow TechNetters:
>
> Is there an IPC Standard and/or guideline line which stats or
> recommend
> that if thin gold plating is to be measured by cross section then Back
> Plating Process should be conducted.
>
>
> Victor,
>
>
> ---
> Questa e-mail è stata controllata per individuare virus con Avast
> antivirus.
> https://www.avast.com/antivirus
|
|
|