Hi Kate,
Stripping Urethane coating as you know is very difficult to strip. If you
have a stripper that works well on the urethane, you then have to be
careful whether or not it will affect any other material on the assembly. I
found one that doesn't have potassium hydroxide in it. I've never used it,
so I don't know how well it works:
https://www.miller-stephenson.com/product/conformal-coating-stripper/
These are the ingredients:
Material
CAS No. Approx. %
1,1,1,2,2,3,4,5,5,5-Decafluoropentane (HFC-43-10mee)
138495-42-8 22 - 30%
Trans,1.2-Dichloroethylene
156-60-5 45 - 50%
Methanol
67-56-1 4 - 10%
N-Methyl-2-Pyrrolidone
872-50-4 18 - 22%
When we had a big project where we had to rework a bunch of boards that
were urethane coated, it was an engineering change where we had to remove
and replace parts on boards that were urethane coated we purchased a
micro-abrasion station from a company called CCR Co.
http://www.ccrco.com/
I think I remember it being recommended by a Lockheed engineer. Anyways the
station worked great. The media used in the station is ESD safe which is
something you need to worry about when using a media-blasting station.
Urethane is best stripped when it is aged a bit. When it is freshly applied
the beads tend to bounce off. I remember if they didn't strip well I would
put them into an oven for a few hours to make the coating become a little
harder so it would strip easier.
Steve
On Tue, Jul 17, 2018 at 5:45 AM, Ekaterina Stees <[log in to unmask]>
wrote:
> Hello Technetters,
> Does anyone know of a chemical remover for urethane conformal coat that
> does not use potassium hydroxide as it's active ingredient?
>
> Thanks,
> Kate
>
--
Steve Gregory
Kimco Design and Manufacturing
Process Engineer
(208) 322-0500 Ext. -3133
--
This email and any attachments are only
for use by the intended
recipient(s) and may contain legally privileged,
confidential, proprietary
or otherwise private information. Any
unauthorized use, reproduction,
dissemination, distribution or other
disclosure of the contents of this
e-mail or its attachments is strictly
prohibited. If you have received
this email in error, please notify the
sender immediately and delete the
original.
|