www.cypress.com/file/202516/download‎
On Apr 13, 2018, at 2:02 PM, Steve Gregory wrote:
> Hi Guy & Doug,
>
> I have Guy's photos posted, he has two charts, I combined them both
> into
> one *.jpg image here:
>
> http://stevezeva.homestead.com/X-ray_dosimeter_charts.jpg
>
> Steve
>
> On Fri, Apr 13, 2018 at 9:16 AM, Douglas Pauls <
> [log in to unmask]> wrote:
>
>> Guy, all graphics get stripped out.
>>
>>
>> Doug Pauls
>> Principal Materials and Process Engineer
>> Rockwell Collins
>>
>> On Fri, Apr 13, 2018 at 10:09 AM, Guy Ramsey
>> <[log in to unmask]> wrote:
>>
>>> We found the situation sufficiently frightening to prompt an
>>> evaluation
>> of
>>> our AXI machine. I promised to let the Technet know what we
>>> found. I am
>> not
>>> at liberty to share all the details of the test. But, if you use AXI
>>> equipment and you are not concerned, you should be.
>>>
>>> These graphics shows where I placed the dosimeters on a transparent
>>> carrier. Red is above 100 rad (si) yellow is between 10 and 100 rad.
>> Green
>>> is less than 10.
>>>
>>
>
>
>
> --
> Steve Gregory
> Kimco Design and Manufacturing
> Process Engineer
> (208) 322-0500 Ext. -3133
>
> --
>
>
>
> This email and any attachments are only
> for use by the intended
> recipient(s) and may contain legally privileged,
> confidential, proprietary
> or otherwise private information. Any
> unauthorized use, reproduction,
> dissemination, distribution or other
> disclosure of the contents of this
> e-mail or its attachments is strictly
> prohibited. If you have received
> this email in error, please notify the
> sender immediately and delete the
> original.
|