On 20 Mar 2018 at 11:50, Guy Ramsey wrote:
> Anyone have experience with AXI damaging devices like embedded SSD,
> mosfets, or programmed memory devices? We are seeing lower than normal
> yields at test. Our assembly processes seem well controlled. So, we
> were brainstorming for places that might deserve closer evaluation.
programmed flashes (boot roms for a big Xilinx FPGA and a big ARM
core µprocessor) got total amnesia but worked fine after
reprogramming. It was intensive 3D tomography because there was the
need for reverse engineering of the inner layers of the 12layer board
in total and especially the fanouts under a 0.5mm pitch BGA. As this
board was the last of its kind there are no statistics about yield or
late failures.
--
Matthias Mansfeld Elektronik * Printed Circuit Board Design and
Assembly
Neithardtstr. 3, D-85540 Haar, GERMANY
Phone: +49-89-4620 0937, Fax: +49-89-4620 0938
Internet: http://www.mansfeld-elektronik.de
OpenPGP: http://www.mansfeld-elektronik.de/gnupgkey/mansfeld.asc
Fingerprint: 6563 057D E6B8 9105 1CE4 18D0 4056 1F54 8B59 40EF