TECHNET Archives

February 2018

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: via design for power stitching with heavy copper
From:
Jack Olson <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Jack Olson <[log in to unmask]>
Date:
Wed, 7 Feb 2018 15:56:25 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (9 lines) 
Doug Brooks published the results of a study on the subject at: http://ultracad.com/articles/via.pdf


On Fri, 19 Jan 2018 19:00:08 +0000, Nutting, Phil <[log in to unmask]> wrote:

>Many of our designs use 1, 2 or 4 ounce copper for our heavy current applications.  Vias and plated holes might have � or 1 ounce of copper plated in.  So, is there a design guide for the number and size of holes to effectively transfer the current from one side of the board to the other side of the board?
>
>Phil Nutting  |  HVP Senior Development Engineer   |  Excelitas Technologies Corp

ATOM RSS1 RSS2