There are also inspection prisms, if you do not need an X-ray view. Here is one: http://www.techni-tool.com/550SO840
There are many brands, and they work quite well.
You use them in conjunction with a good microscope with at least a 4" working distance (focal point). You look straight down at the prism, and through the scope you can inspect the BGA spheres quite well, if you haven't had too much coffee.
A good practice is to have a couple beers or a shot of Akvavit first. Hey, it's justified!
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tempea, Ioan
Sent: Wednesday, December 13, 2017 1:59 PM
To: [log in to unmask]
Subject: Re: [TN] Side view Microscopy
Hi Frank,
You might want to look at something like that http://www.kurtzersa.com/electronics-production-equipment/rework-inspection-systems/inspection-systems/produkt-details/ersascope-1.html
I believe Metcal make something similar (?)
Best regards,
Ioan
-----Message d'origine-----
De : TechNet [mailto:[log in to unmask]] De la part de Frank Kimmey Envoyé : December 13, 2017 2:56 PM À : [log in to unmask] Objet : [TN] Side view Microscopy
I'm looking for a way to non-destructively view BGA balls on a populated PCA.
Does anyone know of a microscope accessory that will allow 90 degree viewing?
Some kind of mirror or a very small camera, etc.
Mostly I am interested in outer ring balls only.
Something I can inspect solder joints with on a heavily populated board.
Xray and CSAM are not where I want to go, I am hoping for something using a microscope.
Any help is appreciated,
FNK
Frank N Kimmey CID+
Electrical Engineer / PCB Design
VeriFone Inc
1400 W Stanford Ranch Road, Suite 200
Rocklin, CA 95765 USA
W: 1-916-625-1818
M: 1-916-833-9877
[log in to unmask]
*********************************************************
This electronic message and any attachments are intended only for the use of the addressee. The information in this electronic message is confidential and proprietary, and may include privileged information. If you are not the intended recipient, please delete this electronic message and any attachments and notify the sender of the error. Please be aware that any unauthorized use, dissemination, distribution or copying of this message or any attachments is strictly prohibited.
|