Correct, and CO2 is used in nearly every pop and pop machine in the world, as well as for charged water, and a million and one industrial applications, including welding, as a pumping liquid, etc.
It is commonly bottled, tanked, decanted, pressurized, etc. So it is very much "traditionally captured". And released too! It is too reactive to use for soldering in place of nitrogen. It would do the opposite of flux and/or nitrogen with two Oxygen atoms.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ed Popielarski
Sent: Tuesday, September 26, 2017 10:40 AM
To: [log in to unmask]
Subject: Re: [TN] N2 vs. CO2, Argon, etc?
I seem to recall CO2 used to pressurize beer kegs all across the country, no?
https://learn.kegerator.com/co2-questions/
Regards,
Ed Popielarski
Engineering Manager
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0695
Cl: 360-544-2289
“It's one kind of victory to slay a beast, move a mountain, and cross a chasm, but it's another kind altogether to realize that the beast, the mountain, and the chasm were of your own design.”
https://goo.gl/maps/mMjg43rXeFB2
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Alasdair Green
Sent: Tuesday, September 26, 2017 8:16 AM
To: [log in to unmask]
Subject: Re: [TN] N2 vs. CO2, Argon, etc?
Nitrogen is a cheap inert gas which is collected as part of liquefaction of oxygen. Argon is expensive, and CO2 is not traditionally captured.
|
