Subject: | |
From: | |
Reply To: | |
Date: | Mon, 7 Aug 2017 08:05:18 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
i believe ipc got std for esd... you better treat as esd sensitive -
embedded components are gaining popularity now. if you set up
internal std. you should do it now as esd sensitive PCB
regardless...IMHO.
On Aug 7, 2017, at 6:43 AM, GRIVON Arnaud wrote:
> Hello TechNet,
>
> Here is a query I got that falls more on PCB design side and
> slightly outside my boundaries...
> Trying the TechNet shortcut as this is probably the quietest week
> of the year with most people being in vacation...
>
> The question is on the rules and requirements regarding the ESD
> susceptibility symbol at PCB level.
> The yellow/black symbol is well-known for electronic components,
> but how should it be implemented at PCB level ?
> All PCB assemblies include ESD sensitive components, so shall it be
> done systematically or can it be missed ?
> If needed, how should it be done : by affixing labels or are etched
> symbols of PCB also an option ? Does it have to be close to the
> most ESD sensitive part locations or is it intended to be a global
> marking for the whole PCBA ?
>
> As far as I can see, the ANSI/ESD S8.1 standard mentions marking at
> PCB level (Quote : "The ESD susceptibility symbol should be used on
> assemblies and devices that have a sensitivity to ESD events") but
> is clearly more focused on marking at the component packaging level
> (Quote : "The symbol may be incorporated on a sticker used to close
> or seal ESD protective packaging to indicate that materials inside
> the package are ESD susceptible").
>
> Thanks in advance for your any clue.
>
> Best regards,
>
> Arnaud Grivon
|
|
|