Need to know basis.
Sent from my BlackBerry 10 smartphone.
Original Message
From: Ken Barton
Sent: Friday, June 9, 2017 12:43
To: TechNet E-Mail Forum; [log in to unmask]
Subject: RE: [TN] [EXTERNAL] Re: [TN] Preferred Parts List help please
"... but it is up to you to find what meet the requirements, e.g. fine pitch device more susceptible.."
This is a key statement. What I get from this is there is compiled/"known" info out there but where to find it.
Ken Barton CID
Technical Designer,
Avionics HW
Blue Origin, LLC
21218 76th Avenue S.
Kent, WA 98032 (253) 437-5625 x625
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Joyce Koo
Sent: Friday, June 09, 2017 9:36 AM
To: [log in to unmask]
Subject: Re: [TN] [EXTERNAL] Re: [TN] Preferred Parts List help please
As for the rad hardening, each vendor got different part number for the part, TI definitely got list, but it is up to you to find what meet the requirements, e.g. fine pitch device more susceptible.. you really have to pay attention for the redundancy, one recoil cascade can knock it all out if two elements are close together... etc. Best of luck for avionics, not like you can get it back for repair and overhaul. Best luck.
Sent from my BlackBerry 10 smartphone.
Original Message
From: Ken Barton
Sent: Friday, June 9, 2017 12:26
To: [log in to unmask]
Reply To: TechNet E-Mail Forum
Subject: Re: [TN] [EXTERNAL] Re: [TN] Preferred Parts List help please
Far as I know we are supposed to be dealing with GIDEP, will take another look.
Thanks,
Ken Barton CID
Technical Designer,
Avionics HW
Blue Origin, LLC
21218 76th Avenue S.
Kent, WA 98032 (253) 437-5625 x625
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Joyce Koo
Sent: Friday, June 09, 2017 9:24 AM
To: [log in to unmask]
Subject: [EXTERNAL] Re: [TN] Preferred Parts List help please
Did you get access to gidep? Not sure what is the status of the program now. If it still active, it might help.
Sent from my BlackBerry 10 smartphone.
Original Message
From: Ken Barton
Sent: Friday, June 9, 2017 12:21
To: [log in to unmask]
Reply To: TechNet E-Mail Forum
Subject: [TN] Preferred Parts List help please
Hi,
We have not yet figured out just how we are going to sort COTS parts by safety/mission criticality based on rad tolerance and longevity etc. We don't even have a preferred Parts list so I'm looking for recommendations for where to start. It's a big question, are there reference lists of COTS parts available that I can cross check with the parts we are using? Is this something that only a dedicated/experienced component engineer usually handles (We don't have one. While I'm a +35 yr experienced layout designer charged with this high level process I'm not a EE or CE level).
Any advice/insight is much appreciated, thank you
Ken Barton CID
Technical Designer,
Avionics HW
Blue Origin, LLC
21218 76th Avenue S.
Kent, WA 98032 (253) 437-5625 x625
[log in to unmask]<mailto:[log in to unmask]>
|