very unusual use as zif contact.  assume it is plated... unless there are
specific reason for zif over standard hard/soft gold, why?
> There is an application where a flex circuit will mate with a Gold plated
> ZIF connector.
>
> The finish on the flex will ideally be platinum.
>
> Does anyone foresee any issues at the gold/platinum interface? Both metals
> will have a nickel barrier underneath.
>
> Thank you,
>
> Mike Lehmicke
> Project Engineer
> DSS Division
> Molex, LLC-Printed Circuit Solutions
> 22 Empire Drive
> St. Paul, MN 55103
> 651-846-7728
> [log in to unmask]<mailto:[log in to unmask]>
>
> [cid:[log in to unmask]][cid:[log in to unmask]]<http://www.molex.com/>
>
>
> ________________________________
>
>
>
> CONFIDENTIALITY NOTICE: This message (including any attachments) may
> contain Molex confidential information, protected by law. If this message
> is confidential, forwarding it to individuals, other than those with a
> need to know, without the permission of the sender, is prohibited.
>
> This message is also intended for a specific individual. If you are not
> the intended recipient, you should delete this message and are hereby
> notified that any disclosure, copying, or distribution of this message or
> taking of any action based upon it, is strictly prohibited.
>
> English | Chinese | Japanese
> www.molex.com/confidentiality.html
>