TECHNET Archives

March 2017

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Round, Non Critical Tolerance, PWB Index pins
From:
Wayne Thayer <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Wayne Thayer <[log in to unmask]>
Date:
Tue, 7 Mar 2017 02:19:45 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (20 lines) 
Hi Victor-

If you look around, I'll bet you can find tungsten wire in the 8-10mil range and standard "gage pin" kits are available that go down to 11 mils.

Tungsten is much better for the smaller diameters because it is a whole lot tougher.

Wayne

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of [log in to unmask]
Sent: Monday, March 06, 2017 12:14 PM
To: [log in to unmask]
Subject: [TN] Round, Non Critical Tolerance, PWB Index pins

Fellow TechNetters:

    I am searching for a vendor that provides PWB index pins in the diameter range of 8-20 mils.   This is for low quantities order of less than 100 pcs.   I even considered piano wire.   The desire length is 2 inches.

Victor,

ATOM RSS1 RSS2