TECHNET Archives

March 2017

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
X-To:
TechNet E-Mail Forum <[log in to unmask]>
Date:
Fri, 17 Mar 2017 16:10:34 -0400
Reply-To:
[log in to unmask]
Message-ID:
<[log in to unmask]>
Subject:
Screen On Insulation
From:
Robert Kondner <[log in to unmask]>
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="us-ascii"
Organization:
Index Designs
MIME-Version:
1.0
Parts/Attachments:
text/plain (25 lines) 
Hi,

 

We have a PCB that turns out to require 2500VAC test for 60 seconds and we
had some flash over on pads to vias. We also have a planar ferrite
transformer with primary windings on one side.

 

Does anyone know of a screen on insulation material that can be used to
increase flash over voltages? I would like to get a 2 or 3 mils of material.
My other option is to have a laser cut layer of isolation but that could
leave air paths under the material.

 

Any other ideas welcome. 

 

Thanks,

Bob K.

ATOM RSS1 RSS2