Hi Joyce,

No reply yet from Kester.

Phil

-----Original Message-----
From: [log in to unmask] [mailto:[log in to unmask]] 
Sent: Wednesday, November 02, 2016 4:03 PM
To: TechNet E-Mail Forum; Nutting, Phil
Subject: Re: [TN] tin/lead wave solder profiles

did you talk to Kester application engineer?
> Hi all,
>
> It has become difficult to find information related to tin/lead wave 
> soldering.  We have a table top tin/lead wave solder system that we 
> are having difficulty dialing in.  We are running Kester 197 flux and 
> Kester
> 63/37 bar solder and producing thru-hole circuit boards for space 
> applications.
>
> I'm looking for typical 0.062" board parameters of top side board 
> temperatures after fluxing and before hitting the wave.
>
> Thanks in advance,
>
> Phil Nutting  |  HVP Development Engineer   |  Excelitas Technologies Corp
>
> Lab: +1 978.224.4332   |  Office: +1 978.224.4152
> 35 Congress St, Salem, MA  01970 USA
> [log in to unmask]<mailto:[log in to unmask]>
> www.excelitas.com<http://www.excelitas.com/>
>
>
> [Excelitas R_emailsig]
>
>
> Please consider the environment before printing this e-mail.
> ________________________________
> This email message and any attachments are confidential and 
> proprietary to Excelitas Technologies Corp. If you are not the 
> intended recipient of this message, please inform the sender by 
> replying to this email or sending a message to the sender and destroy 
> the message and any attachments. Thank you.
>