That is really good to know.
To all of you who responded, thank you so much! I really don't know what we would do without the excellent people in Technet!
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of lduso - Diamond-MT.com
Sent: Wednesday, October 05, 2016 10:22 AM
To: [log in to unmask]
Subject: Re: [TN] Silicone Conformal Coating supplier
Another factor is that the fluorescence is not well dispersed so it does not resemble a very smooth color like 1B31. It will be mottled under the light but it is easy to see under white light.
Lloyd Duso
Plant Manager
Diamond-MT
(814) 535-3505
www.Diamond-mt.com
On Wed, Oct 5, 2016 at 11:15 AM, Douglas Pauls < [log in to unmask]> wrote:
> Dean,
> We use Dow Corning 1-2577 as our approved silicone and it has always
> worked well for us. It is about 20-30% toluene, so it is a VOC, but
> if memory serves, there are low VOC versions of 1-2577 out there.
> While it does have a relatively quick tack time, you may want to bake
> it a while to drive the cure reaction and improve adhesion.
>
>
> Doug Pauls
> Principal Materials and Process Engineer Rockwell Collins
>
> On Wed, Oct 5, 2016 at 10:08 AM, Wayne Thayer - EXT <
> [log in to unmask]
> > wrote:
>
> > Isn't that stuff about half toluene?
> >
> > Really--I love 1-2577 too, but won't it cause all of the "VOCs"
> > alarms in the county to go off at once?
> >
> > Wayne Thayer
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of lduso -
> Diamond-MT.com
> > Sent: Wednesday, October 05, 2016 7:54 AM
> > To: [log in to unmask]
> > Subject: Re: [TN] Silicone Conformal Coating supplier
> >
> > 90% of our customers (DOD & commercial) call out Dow 1-2577. A good
> > all around SR that is extremely easy to apply, t/u, rework and has a
> > very
> quick
> > "dry" time of a mere 20 minutes @ room temp. Others are MG Chemicals
> > and Humiseal.
> >
> > Lloyd Duso
> > Plant Manager
> > Diamond-MT
> > (814) 535-3505
> > www.Diamond-mt.com
> >
> > On Wed, Oct 5, 2016 at 10:48 AM, Stadem, Richard D. <
> > [log in to unmask]> wrote:
> >
> > > I have a client who needs to qualify a silicone coating, either an
> > > oven cure or UV cure coating. I am looking for a good supplier or
> > distributor.
> > > If any of you coating experts would care to share your favorites
> > > with me, I would greatly appreciate it, as I am not an expert on
> > > sources of coatings (best pricing, service, stocking, etc.) Feel
> > > free to contact me directly by answering this email.
> > > Thanks for any info you feel comfortable sharing.
> > > dean
> > >
> >
>
|
