TECHNET Archives

October 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Joyce Koo <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Thu, 13 Oct 2016 08:54:27 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (68 lines)
ha, here is why... NFF.
"The Galaxy Note 7 botched recall was apparently induced as a result of
corporate secrecy plus a lack of communication between test engineers —and
the company still can't reproduce the fires in the testing labs."
         jk
> http://bgr.com/2016/09/08/galaxy-note-7-recall-battery/
> based on official story, the anode and cathod came in "contact" = MFG
> error... how could that happen?  the whole idea of battery is anode and
> cathod should not in contact... tolerance issue? how could that be MFG
> error, if it is, why is not caught during testing? battery short (in
> contact) should be easy to catch, we are not talking about charge leakage
> here... how it escaped?  more question than answer... (don't tell me SI to
> empire conversion or round up error stuff like that...).  not small
> gap,but in contact... must be lost in translation...
>                       jk
>> Too small a gap between the battery plus and minus terminals
>>
>> Best regards,
>>
>> John Burke
>>
>>
>>> On Oct 12, 2016, at 10:17 PM, Ioan Tempea
>>> <[log in to unmask]> wrote:
>>>
>>> Hi Technos,
>>>
>>> Does any of you know what the problem is with the device? Both Apple
>>> and
>>> Microsoft went through misery in the past, but with less financial
>>> problems.
>>>
>>> This would be one fine failure analysis to learn from! At least for us
>>> process engineers, because some designers and project managers never
>>> seem to learn.
>>>
>>> Best regards,
>>>
>>> Ioan Tempea, P. Eng.
>>> Manufacturing Engineer, Satellite Systems
>>>
>>> [cid:[log in to unmask]]
>>>
>>> MacDonald, Dettwiler and Associates Corporation, 21025 Trans-Canada
>>> Highway, Ste-Anne-de-Bellevue, QC, Canada H9X 3R2
>>> Tel: +1-514-457-2150 x3556
>>> www.mdacorporation.com<http://www.mdacorporation.com/>
>>>
>>> This e-mail, and any attachments, are intended solely for the use of
>>> the
>>> intended recipient(s) and may contain legally privileged, proprietary
>>> and/or confidential information. Any use, disclosure, dissemination,
>>> distribution or copying of this e-mail and any attachments for any
>>> purposes that have not been specifically authorized by the sender is
>>> strictly prohibited. If you are not the intended recipient, please
>>> immediately notify the sender by reply e-mail and permanently delete
>>> all
>>> copies and attachments. This email is for informational purposes only
>>> and shall not be interpreted to authorize or conclude a binding
>>> agreement between MDA and any other party unless this email contains or
>>> is accompanied by an express written confirmation of MDA's intention to
>>> enter into a binding agreement, such confirmation shall only be
>>> provided
>>> by an authorized representative of MDA.
>>
>
>

ATOM RSS1 RSS2