Hello Steve,
I am in Turkey (Turkey is country☺) I am reading your e mails now. Your ladies are very crazy or hardworking ☺
Our capacitor’s document like attachment. Firstly we applied solder paste (Amtech nws-4200 type-3) to pads then reflowed. I will apply your suggestion that “everything was done by hand except for the cap on the very bottom, it was machine placed.”
For Design for manufacturability (DFM), is it right height of component? I have not a dfm handbook. Anybody please send me a link for download the DFM handbook.
Selim
From: Steve Gregory [mailto:[log in to unmask]]
Sent: Friday, October 07, 2016 8:20 PM
To: TechNet E-Mail Forum; Avni Selim Özçukurlu
Subject: Re: [TN] smd component height
Hello Avini,
Five capacitors?! Wow, that's quite a stack! I worked with some ladies in the past where we did quad stacks and that was pretty tough, especially since they were 0402's. What size caps are you stacking? Do you dispense any solder paste on the terminations?
With the stacks that were done in the photo below we had to do it in two stages, we did the first layer of two capacitors and reflowed the board, then did the second layer of two capacitors and reflowed things one more time:
http://stevezeva.homestead.com/files/Quad_Stack.JPG
Yes, these are 0402's and everything was done by hand except for the cap on the very bottom, it was machine placed. Then paste was dispensed by hand on each cap termination and then the stacked cap was hand placed. I don't know what we paid those ladies, but it wasn't enough...
Steve
On Fri, Oct 7, 2016 at 10:02 AM, Avni Selim Özçukurlu <[log in to unmask]<mailto:[log in to unmask]>> wrote:
Hello All,
I have a question about smd assembly. In the attachment, there are five capacitors that mounted like POP. It's height is 10mm. Is there any constraint about height of smd components in the IPC-A-610 or any IPC.
We have a trouble about Reflow process for 10mm-component. Solder is not run towards to top and it happens cold solder.
A.Selim ÖZÇUKURLU
Aselsan MGEO - CCA Production and Test Engineer
######################################################################
Dikkat:
Bu elektronik posta mesaji kisisel ve ozeldir. Eger size
gonderilmediyse lutfen gondericiyi bilgilendirip mesaji siliniz.
Firmamiza gelen ve giden mesajlar virus taramasindan gecirilmekte,
guvenlik nedeni ile kontrol edilerek saklanmaktadir. Mesajdaki
gorusler ve bakis acisi gondericiye ait olup Aselsan A.S. resmi
gorusu olmak zorunda degildir.
######################################################################
Attention:
This e-mail message is privileged and confidential. If you are
not the intended recipient please delete the message and notify
the sender. E-mails to and from the company are monitored for
operational reasons and in accordance with lawful business practices.
Any views or opinions presented are solely those of the author and
do not necessarily represent the views of the company.
######################################################################
[http://fileserver1.kimco.net/PublicDocs/KDMsig200.png]
This email and any attachments are only for use by the intended recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original.
######################################################################
Dikkat:
Bu elektronik posta mesaji kisisel ve ozeldir. Eger size
gonderilmediyse lutfen gondericiyi bilgilendirip mesaji siliniz.
Firmamiza gelen ve giden mesajlar virus taramasindan gecirilmekte,
guvenlik nedeni ile kontrol edilerek saklanmaktadir. Mesajdaki
gorusler ve bakis acisi gondericiye ait olup Aselsan A.S. resmi
gorusu olmak zorunda degildir.
######################################################################
Attention:
This e-mail message is privileged and confidential. If you are
not the intended recipient please delete the message and notify
the sender. E-mails to and from the company are monitored for
operational reasons and in accordance with lawful business practices.
Any views or opinions presented are solely those of the author and
do not necessarily represent the views of the company.
######################################################################
|