I would simply ask because more than likely they just did not add addendums
to the website listing. We do not specify it on our website because the
addendums are a relatively recent addition and most websites do not get
updated that often.

Lloyd Duso
Plant Manager
Diamond-MT
(814) 535-3505
www.Diamond-mt.com

On Thu, Sep 29, 2016 at 11:26 AM, Garcia, Rigo (GSFC-370.0)[ARES CORP] <
[log in to unmask]> wrote:

> When I looked at their website I read this:
>
> "Workmanship in accordance with:
>         •IPC-J-Std-001
>         •IPC-A-610 Level I, II & III and
>         •IPC/WHMA-A-620"
>
> I noted that they don't reference the Space Addendums of either J-STD-001
> or IPC/WHMA-A-620.
>
> Compliance with the space addendums is a requirement for NASA when using
> these two IPC standards.
>
> Rigo Garcia
>
> “The future belongs to those who believe in the beauty of their dreams” –
> Eleanor Roosevelt
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of John Anselmo
> Sent: Wednesday, September 28, 2016 6:22 PM
> To: [log in to unmask]
> Subject: Re: [TN] Wire Harness Build to Print suppliers with NASA approval
>
> http://www.skecorp.com/
>
> Or look at this company.
> Regards,
> John
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Charlie Pitarys
> Sent: Wednesday, September 28, 2016 3:14 PM
> To: [log in to unmask]
> Subject: Re: [TN] Wire Harness Build to Print suppliers with NASA approval
>
> Tom, look at these guys.
> http://www.wildwoodelectronics.com/index.html
>
>
> Best Regards / Mit freundlichen Grüßen / Yang Benar / Saludos / Drishat
> shalom /  Köszönettel / ขอบคุณครับ
>
> Charlie Pitarys (USA Retired)
> Technical Expert Sales Support
>
> Phone: (615) 983-4523 (preferred)
> Mobile: (615) 969-1919
> Skype: charlie_pitarys
> www.KYZEN.com
>
>
>
>
>
> CONFIDENTIAL
> The content of this message, including any attachments, may contain
> privileged and/or confidential information proprietary to KYZEN and is
> intended only for the named addressees. If you are not the intended
> recipient, you may not disseminate, distribute or copy this email. Please
> notify the sender immediately by email if you have received this email in
> error and delete this email from your system.
>
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Carroll, Thomas A
> Sent: Wednesday, September 28, 2016 2:31 PM
> To: [log in to unmask]
> Subject: [TN] Wire Harness Build to Print suppliers with NASA approval
>
> Can anyone tell me the names and locations of some good build to print
> wire harness shops that are experienced with building NASA approved wire
> harnesses?
>
>
>
> Any suggestions would be appreciated.
>
>
>
> Regards,
>
> Tom
>
> Thomas A. Carroll, CQA, FAA ODA Unit Member for BDS Supplier Quality
> Engineer Boeing Defense, Space and Security - East Region Supplier Quality
> eFAX: 314-777-1845
> Virtual Desk Phone Number: 314-545-2358
> email: [log in to unmask]<mailto:[log in to unmask]>
> P Go Green! Please do not print this e-mail unless necessary.
> NOTE: This communication may contain privileged or other confidential
> information. If you are not the intended recipient, or believe you have
> received this communication in error, please do not print, copy,
> retransmit, disseminate, or otherwise use the information. Also, please
> indicate to the sender that you have received this e-mail in error, and
> delete the copy you received. Thank you.
> EXPORT COMPLIANCE STATEMENT:
> "The information contained herein is or may be controlled by the
> International Traffic in Arms Regulations (ITAR), 22 CFR 120-130, and may
> not be exported, or disclosed to a foreign person, whether in the United
> States or abroad, without prior U.S. Government written approval"
>