Hi Mr Trikeman, still in, as I can see. Good to see you. Guess ´TN limps at
low speed nowadays.  Maybe somone can reignite and popularize the org. for
instance you? Have a nice day, Steve, and think of me when you dwell among
the clouds./Inge


On 7 August 2016 at 11:22, Steven Creswick <[log in to unmask]>
wrote:

> Carl,
>
> I don't comprehend the details of your application but will acknowledge
> that there are adhesives out there that are nickel, or carbon-filled, which
> have interesting properties.
>
> Ditto for metallo-organics
>
> Then let your mind leap to vacuum deposition of various metal, and
> non-metal combinations
>
> There are any number of metal foils one can get as well
>
> one can even plasma spray some interesting metal combinations, if you can
> take the initial heat
>
> Even magneto-resistive fluids....
>
> Steve C
>
>
>
> > On Aug 6, 2016, at 11:40 PM, Carl Van Wormer <[log in to unmask]>
> wrote:
> >
> > I usually want my physical structural resistances to be as low as
> possible (conductors) or as high as possible (insulators).  Now I need an
> intermediate resistance, probably in the range of 100 to 1000 Ohms per
> square.  The application will be an electrostatic shield in an alternating
> field, hopefully balancing magnetic heating losses against capacitive
> shielding effectiveness.
> > I have never seen these materials offered from any of my normal sources,
> but I’m sure that there is something out there that will work.  It could be
> sheet materials, paints, or slightly conductive epoxies, or something else
> I haven’t thought of.  Since there is a very wide experience base on this
> site, I’m asking here first.
> > Any suggestions will be appreciated.
> >
> > Thanks,
> > Carl
> >
> >
> > ​​​​​
> >
> > Carl B. Van Wormer, P.E., AE7GD
> > Senior Hardware Engineer
> > Cipher Engineering LLC
> >    21195 NW Evergreen Pkwy Ste 209
> >    Hillsboro, OR  97124-7167
> >    503-617-7447x303
> >    [log in to unmask]<mailto:[log in to unmask]>
> http://cipherengineering.com<http://cipherengineering.com/>
> >
> > This message may contain confidential and/or proprietary information,
> and is intended for the person/entity to whom it was originally addressed.
> Any use by others is strictly prohibited.  If I sent this to you by
> mistake, please be nice and delete it, and then tell me of my mistake so I
> can send it to the right person.
> >
> >
>