TECHNET Archives

August 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>, Carl Van Wormer <[log in to unmask]>
Date:
Sun, 7 Aug 2016 05:22:31 -0400
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Steven Creswick <[log in to unmask]>
Message-ID:
Subject:
From:
Steven Creswick <[log in to unmask]>
MIME-Version:
1.0 (1.0)
In-Reply-To:
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="utf-8"
Parts/Attachments:
text/plain (42 lines)
Carl, 

I don't comprehend the details of your application but will acknowledge that there are adhesives out there that are nickel, or carbon-filled, which have interesting properties.

Ditto for metallo-organics

Then let your mind leap to vacuum deposition of various metal, and non-metal combinations

There are any number of metal foils one can get as well

one can even plasma spray some interesting metal combinations, if you can take the initial heat

Even magneto-resistive fluids....

Steve C



> On Aug 6, 2016, at 11:40 PM, Carl Van Wormer <[log in to unmask]> wrote:
> 
> I usually want my physical structural resistances to be as low as possible (conductors) or as high as possible (insulators).  Now I need an intermediate resistance, probably in the range of 100 to 1000 Ohms per square.  The application will be an electrostatic shield in an alternating field, hopefully balancing magnetic heating losses against capacitive shielding effectiveness.
> I have never seen these materials offered from any of my normal sources, but I’m sure that there is something out there that will work.  It could be sheet materials, paints, or slightly conductive epoxies, or something else I haven’t thought of.  Since there is a very wide experience base on this site, I’m asking here first.
> Any suggestions will be appreciated.
> 
> Thanks,
> Carl
> 
> 
> ​​​​​
> 
> Carl B. Van Wormer, P.E., AE7GD
> Senior Hardware Engineer
> Cipher Engineering LLC
>    21195 NW Evergreen Pkwy Ste 209
>    Hillsboro, OR  97124-7167
>    503-617-7447x303
>    [log in to unmask]<mailto:[log in to unmask]>     http://cipherengineering.com<http://cipherengineering.com/>
> 
> This message may contain confidential and/or proprietary information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited.  If I sent this to you by mistake, please be nice and delete it, and then tell me of my mistake so I can send it to the right person.
> 
> 

ATOM RSS1 RSS2