TECHNET Archives

July 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Deng RongJun <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Deng RongJun <[log in to unmask]>
Date:
Wed, 6 Jul 2016 06:53:04 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (1 lines)


The shielding cans material is CuNi18Zn20.







Best regards

Deng



From: Deng RongJun 

Sent: Wednesday, July 06, 2016 2:39 PM

To: [log in to unmask]

Subject: Shielding cans deformation during reflow



Hello fellow Techies,



I have got a problem with shielding cans deformation issue. There are several kinds of shielding cans on board, we have found one shielding have deformation after reflow, one side of shielding lift and not solder on board.

We also do a test, bake the individual shielding in oven with 230 degree, the shielding still have deformation and two corner have lift. Take out the shielding from oven and temperature go down, then shielding go back to good.

Any one of you have experience on this case?



Pictures:

https://goo.gl/photos/xQLbFT1AEwTR2iV68



Thank you very much.



Best regards

Deng


ATOM RSS1 RSS2