TECHNET Archives

June 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Graham Collins <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Graham Collins <[log in to unmask]>
Date:
Wed, 29 Jun 2016 18:31:55 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (168 lines)
What values are appropriate for toes?

I once worked with some QA who were insistent that a metal ruler being used to measure a length with a tolerance of +- .25" - had to be calibrated.

regards,

Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867

Note: new address!  We have moved to 433 Cutler Avenue
Dartmouth Nova Scotia B3B 0J5

On 6/29/2016 3:19 PM, John Burke wrote:

You will need one thumb and a decibel meter......

Below 500 gram hammer 40+ dB is a pass
500 - 1000 grams 60+ dB is a pass
1000 + grams - a trip to the ER is a pass

All assuming a 1 meter drop.

Best regards,

John Burke




On Jun 29, 2016, at 11:13 AM, Ed Popielarski <[log in to unmask]><mailto:[log in to unmask]> wrote:

Does hammer need calibration per AS9100?

Ed Popielarski
Engineering Manager


                              970 NE 21st Ct.
                             Oak Harbor, Wa. 98277

                             Ph: 360-675-1322
                             Fx: 206-624-0695
                             Cl: 360-544-2289



      "It's one kind of victory to slay a beast, move a mountain, and cross a chasm, but it's another kind altogether to realize that the beast, the mountain, and the chasm were of your own design."
https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Collins
Sent: Wednesday, June 29, 2016 9:15 AM
To: [log in to unmask]
Subject: [TN] wire harness fixtures

Harness board nails:

- Panduit makes them with the shoulder, near the edge.

- E-Z Hook makes nails with no shoulder.

I've used the E-Z hook ones - no big deal to get the nails about the same height.  Standard hammer works fine.

regards,

Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867

Note: new address!  We have moved to 433 Cutler Avenue Dartmouth Nova Scotia B3B 0J5

On 6/29/2016 12:57 PM, Bob Wettermann wrote:

Alright ....some of us are working.

Perhaps someone can help with a "<[log in to unmask]:[TN]wireharnessfixturesHarnessboardnails:-Panduitmakesthemwiththeshoulder,neartheedge.-E-ZHookmakesnailswithnoshoulder.I'veusedtheE-Zhookones-nobigdealtogetthenailsaboutthesameheight.Standardhammerworksfine.regards,GrahamCollinsSeniorProcessEngineerSunselSystems(902)444-7867Note:newaddress!Wehavemovedto433CutlerAvenueDartmouthNovaScotiaB3B0J5On6/29/201612:57PM,BobWettermannwrote:Alright....someofusareworking.Perhapssomeonecanhelpwitha" target="_blank">https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A-----OriginalMessage-----From:TechNet[mailto:[log in to unmask]]OnBehalfOfGrahamCollinsSent:Wednesday,June29,20169:15AMTo:[log in to unmask]:[TN]wireharnessfixturesHarnessboardnails:-Panduitmakesthemwiththeshoulder,neartheedge.-E-ZHookmakesnailswithnoshoulder.I'veusedtheE-Zhookones-nobigdealtogetthenailsaboutthesameheight.Standardhammerworksfine.regards,GrahamCollinsSeniorProcessEngineerSunselSystems(902)444-7867Note:newaddress!Wehavemovedto433CutlerAvenueDartmouthNovaScotiaB3B0J5On6/29/201612:57PM,BobWettermannwrote:Alright....someofusareworking.Perhapssomeonecanhelpwitha>low tech" question regarding the wiring boards used for wire harnesses.

Most users I visit have simple finishing nails nailed in to plywood to fix cable routing.

Recently I saw a user using a specialty nail with a rounded head and a nail end that was tapered. In addition they had approximately 1/2 way along the nails' length a landing pad that was a way to make sure that all of the nails were at the same height.

Anyone familiar with these nails? Looks like a specialty tool needs to be used to bang them in to a wiring harness board.

Thanks!

Happy 4th...remember to let go of the fireworks after you light them!


On Wed, Jun 29, 2016 at 9:50 AM, George Wenger <[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
wrote:



I am also here

----- Original Message -----

From: "Victor Hernandez" <[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
To: [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
Sent: Wednesday, June 29, 2016 10:03:51 AM
Subject: Re: [TN] Anyone at home?

I am here... It's been quite....

Victor,

-----OI am here....original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: Wednesday, June 29, 2016 8:43 AM
To: [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
Subject: [TN] Anyone at home?

No messages for 2 days

Brian

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________



______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________









______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]> ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________



______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________




______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2