I hear you knock'in, but you can't come in





As the wise Minion once said,

" I am one step away from being rich!
      All I need now is money!"​

On Wed, Jun 29, 2016 at 12:11 PM, Stadem, Richard D. <
[log in to unmask]> wrote:

> I always used the longer 1 and 1/2 inch electrical wiring staples, they
> work quite well as a wireholder on the harness boards.
> I used a newfangled high tech tool that punches these wiring staples into
> the board. I think it was called a "hammer".
> As for letting go of the fireworks, I think now is an appropriate time for
> Steve to post that infamous video of my fellow Viking Inge lighting a
> firecracker off between his teeth. After all, Monday is the 4th of July.
> Odin
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Wettermann
> Sent: Wednesday, June 29, 2016 10:57 AM
> To: [log in to unmask]
> Subject: Re: [TN] Anyone at home?
>
> Alright ....some of us are working.
>
> Perhaps someone can help with a "low tech" question regarding the wiring
> boards used for wire harnesses.
>
> Most users I visit have simple finishing nails nailed in to plywood to fix
> cable routing.
>
> Recently I saw a user using a specialty nail with a rounded head and a
> nail end that was tapered. In addition they had approximately 1/2 way along
> the nails' length a landing pad that was a way to make sure that all of the
> nails were at the same height.
>
> Anyone familiar with these nails? Looks like a specialty tool needs to be
> used to bang them in to a wiring harness board.
>
> Thanks!
>
> Happy 4th...remember to let go of the fireworks after you light them!
>
>
> On Wed, Jun 29, 2016 at 9:50 AM, George Wenger <[log in to unmask]>
> wrote:
>
> > I am also here
> >
> > ----- Original Message -----
> >
> > From: "Victor Hernandez" <[log in to unmask]>
> > To: [log in to unmask]
> > Sent: Wednesday, June 29, 2016 10:03:51 AM
> > Subject: Re: [TN] Anyone at home?
> >
> > I am here... It's been quite....
> >
> > Victor,
> >
> > -----OI am here....original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
> > Sent: Wednesday, June 29, 2016 8:43 AM
> > To: [log in to unmask]
> > Subject: [TN] Anyone at home?
> >
> > No messages for 2 days
> >
> > Brian
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
> >
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
>
>
>
> --
> Bob Wettermann
> BEST Inc
> [log in to unmask]
> Cell: 847-767-5745
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________