Harness board nails:

 - Panduit makes them with the shoulder, near the edge.

 - E-Z Hook makes nails with no shoulder.

I've used the E-Z hook ones - no big deal to get the nails about the same height.  Standard hammer works fine.

regards,

Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867

Note: new address!  We have moved to 433 Cutler Avenue
Dartmouth Nova Scotia B3B 0J5

On 6/29/2016 12:57 PM, Bob Wettermann wrote:

Alright ....some of us are working.

Perhaps someone can help with a "low tech" question regarding the wiring
boards used for wire harnesses.

Most users I visit have simple finishing nails nailed in to plywood to fix
cable routing.

Recently I saw a user using a specialty nail with a rounded head and a nail
end that was tapered. In addition they had approximately 1/2 way along the
nails' length a landing pad that was a way to make sure that all of the
nails were at the same height.

Anyone familiar with these nails? Looks like a specialty tool needs to be
used to bang them in to a wiring harness board.

Thanks!

Happy 4th...remember to let go of the fireworks after you light them!


On Wed, Jun 29, 2016 at 9:50 AM, George Wenger <[log in to unmask]><mailto:[log in to unmask]>
wrote:



I am also here

----- Original Message -----

From: "Victor Hernandez" <[log in to unmask]><mailto:[log in to unmask]>
To: [log in to unmask]<mailto:[log in to unmask]>
Sent: Wednesday, June 29, 2016 10:03:51 AM
Subject: Re: [TN] Anyone at home?

I am here... It's been quite....

Victor,

-----OI am here....original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: Wednesday, June 29, 2016 8:43 AM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: [TN] Anyone at home?

No messages for 2 days

Brian

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________



______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________









______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________