SIR?
Ken Barton
Technical Designer,
Vehicles & GSE/
Avionics HW
Blue Origin, LLC
21218 76th Avenue S.
Kent, WA 98032
(253) 437-5625 x625
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: Friday, June 10, 2016 7:45 AM
To: [log in to unmask]
Subject: [Possible Spam] Re: [TN] Industry Resources for IPC Test Boards
Importance: Low
Especially if doing a SIR comb test.
The Dark Eldar
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Friday, June 10, 2016 9:23 AM
To: [log in to unmask]
Subject: Re: [TN] Industry Resources for IPC Test Boards
To some extent yes. But sometimes, if you are doing simple testing or screening experiments, commodity boards are OK. Just make sure you pre-clean them since you are never quite sure of what process they went through.
Doug Pauls
Principal Materials and Process Engineer Rockwell Collins
On Fri, Jun 10, 2016 at 9:16 AM, Yuan-chia Joyce Koo <[log in to unmask]>
wrote:
> i thought you better use your own board house to get some reliable
> data out of it.... (soldermask,board process if it is test for
> performance or reliability, process control, etc). Am I wrong?
> jk
> On Jun 10, 2016, at 9:06 AM, Douglas Pauls wrote:
>
> That's because it is a tightly held secret. Ya has ta be a member of
> the
>> Kabal to get access.....
>>
>> I know the list you are talking about and last I saw it, the list had
>> become seriously out of date, with half of the board shops no longer
>> in existence.
>>
>> For me, since the Gerber files are readily available, I have our
>> trusted suppliers make them. Although, one of our "trusted
>> suppliers" mucked up my last batch of B-24 boards.
>> I also know that Practical Components in California carries most of
>> the major IPC boards. Russell Kido at Practical can fix you up.
>>
>>
>> Doug Pauls
>> Principal Materials and Process Engineer Rockwell Collins
>>
>> On Fri, Jun 10, 2016 at 7:57 AM, Richard Kraszewski <
>> [log in to unmask]> wrote:
>>
>> There used to be a link to IPC test board suppliers at IPC.org .
>>>
>>> Is there still a link there somewhere?
>>>
>>> I couldn't find it today
>>>
>>> Rich Kraszewski /Plexus
>>>
>>>
>>> ____________________________________________________________________
>>> __ This email has been scanned by the Symantec Email Security.cloud
>>> service.
>>> For more information please contact helpdesk at x2960 or
>>> [log in to unmask]
>>> ____________________________________________________________________
>>> __
>>>
>>>
>>
>> _____________________________________________________________________
>> _ This email has been scanned by the Symantec Email Security.cloud
>> service.
>> For more information please contact helpdesk at x2960 or
>> [log in to unmask]
>> _____________________________________________________________________
>> _
>>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|