it depends on product and application method (how good is the your
attachment), plus the moisture level and temp range of your product.
some of the ACF swell when expose to the high RH, you will get high
resistance joint (you need to take consideration in your system
design if intend used in un-controlled environment).
my 1.4 cents
jk
On Jun 29, 2016, at 4:03 PM, Ioan Tempea wrote:
> Dear Technos,
>
> Any of you have experience with ACF bonding in high reliability
> products? The application would be bonding flex to rigid PCB.
>
> A typical material datasheet is http://multimedia.3m.com/mws/media/
> 407590O/3mtm-anisotropic-conductive-film-5363.pdf
>
> Thanks,
>
> Ioan Tempea, P. Eng.
> Manufacturing Engineer, Satellite Systems
>
> [cid:[log in to unmask]]
>
> MacDonald, Dettwiler and Associates Corporation, 21025 Trans-Canada
> Highway, Ste-Anne-de-Bellevue, QC, Canada H9X 3R2
> Tel: +1-514-457-2150 x3556
> www.mdacorporation.com<http://www.mdacorporation.com/>
>
> This e-mail, and any attachments, are intended solely for the use
> of the intended recipient(s) and may contain legally privileged,
> proprietary and/or confidential information. Any use, disclosure,
> dissemination, distribution or copying of this e-mail and any
> attachments for any purposes that have not been specifically
> authorized by the sender is strictly prohibited. If you are not the
> intended recipient, please immediately notify the sender by reply e-
> mail and permanently delete all copies and attachments. This email
> is for informational purposes only and shall not be interpreted to
> authorize or conclude a binding agreement between MDA and any other
> party unless this email contains or is accompanied by an express
> written confirmation of MDA's intention to enter into a binding
> agreement, such confirmation shall only be provided by an
> authorized representative of MDA.
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|