If it is being used as a gauge to confirm the part meets print, and all your inspection gauges are marked down as being calibrated, it must be on the calibration cycle. If it is just being used to provide estimations, there is no need to calibrate it. Also, not all rulers have the resolution necessary to calibrate it. I wouldn't try and calibrate a metal ruler from staples.
http://www.nist.gov/pml/div683/grp01/cst-precisionmetalrulers.cfm
Ted T.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Collins
Sent: Wednesday, June 29, 2016 1:32 PM
To: [log in to unmask]
Subject: Re: wire harness fixtures
What values are appropriate for toes?
I once worked with some QA who were insistent that a metal ruler being used to measure a length with a tolerance of +- .25" - had to be calibrated.
regards,
Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867
Note: new address! We have moved to 433 Cutler Avenue Dartmouth Nova Scotia B3B 0J5
On 6/29/2016 3:19 PM, John Burke wrote:
You will need one thumb and a decibel meter......
Below 500 gram hammer 40+ dB is a pass
500 - 1000 grams 60+ dB is a pass
1000 + grams - a trip to the ER is a pass
All assuming a 1 meter drop.
Best regards,
John Burke
On Jun 29, 2016, at 11:13 AM, Ed Popielarski <[log in to unmask]><mailto:[log in to unmask]> wrote:
Does hammer need calibration per AS9100?
Ed Popielarski
Engineering Manager
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0695
Cl: 360-544-2289
"It's one kind of victory to slay a beast, move a mountain, and cross a chasm, but it's another kind altogether to realize that the beast, the mountain, and the chasm were of your own design."
https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Collins
Sent: Wednesday, June 29, 2016 9:15 AM
To: [log in to unmask]
Subject: [TN] wire harness fixtures
Harness board nails:
- Panduit makes them with the shoulder, near the edge.
- E-Z Hook makes nails with no shoulder.
I've used the E-Z hook ones - no big deal to get the nails about the same height. Standard hammer works fine.
regards,
Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867
Note: new address! We have moved to 433 Cutler Avenue Dartmouth Nova Scotia B3B 0J5
On 6/29/2016 12:57 PM, Bob Wettermann wrote:
Alright ....some of us are working.
Perhaps someone can help with a "<[log in to unmask]:[TN]wireharnessfixturesHarnessboardnails:-Panduitmakesthemwiththeshoulder,neartheedge.-E-ZHookmakesnailswithnoshoulder.I'veusedtheE-Zhookones-nobigdealtogetthenailsaboutthesameheight.Standardhammerworksfine.regards,GrahamCollinsSeniorProcessEngineerSunselSystems(902)444-7867Note:newaddress!Wehavemovedto433CutlerAvenueDartmouthNovaScotiaB3B0J5On6/29/201612:57PM,BobWettermannwrote:Alright....someofusareworking.Perhapssomeonecanhelpwitha" target="_blank">https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A-----OriginalMessage-----From:TechNet[mailto:[log in to unmask]]OnBehalfOfGrahamCollinsSent:Wednesday,June29,20169:15AMTo:[log in to unmask]:[TN]wireharnessfixturesHarnessboardnails:-Panduitmakesthemwiththeshoulder,neartheedge.-E-ZHookmakesnailswithnoshoulder.I'veusedtheE-Zhookones-nobigdealtogetthenailsaboutthesameheight.Standardhammerworksfine.regards,GrahamCollinsSeniorProcessEngineerSunselSystems(902)444-7867Note:newaddress!Wehavemovedto433CutlerAvenueDartmouthNovaScotiaB3B0J5On6/29/201612:57PM,BobWettermannwrote:Alright....someofusareworking.Perhapssomeonecanhelpwitha>low tech" question regarding the wiring boards used for wire harnesses.
Most users I visit have simple finishing nails nailed in to plywood to fix cable routing.
Recently I saw a user using a specialty nail with a rounded head and a nail end that was tapered. In addition they had approximately 1/2 way along the nails' length a landing pad that was a way to make sure that all of the nails were at the same height.
Anyone familiar with these nails? Looks like a specialty tool needs to be used to bang them in to a wiring harness board.
Thanks!
Happy 4th...remember to let go of the fireworks after you light them!
On Wed, Jun 29, 2016 at 9:50 AM, George Wenger <[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
wrote:
I am also here
----- Original Message -----
From: "Victor Hernandez" <[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
To: [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
Sent: Wednesday, June 29, 2016 10:03:51 AM
Subject: Re: [TN] Anyone at home?
I am here... It's been quite....
Victor,
-----OI am here....original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: Wednesday, June 29, 2016 8:43 AM
To: [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
Subject: [TN] Anyone at home?
No messages for 2 days
Brian
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]><mailto:[log in to unmask]><mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|