Subject: | |
From: | |
Reply To: | |
Date: | Wed, 29 Jun 2016 16:11:32 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I always used the longer 1 and 1/2 inch electrical wiring staples, they work quite well as a wireholder on the harness boards.
I used a newfangled high tech tool that punches these wiring staples into the board. I think it was called a "hammer".
As for letting go of the fireworks, I think now is an appropriate time for Steve to post that infamous video of my fellow Viking Inge lighting a firecracker off between his teeth. After all, Monday is the 4th of July.
Odin
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Wettermann
Sent: Wednesday, June 29, 2016 10:57 AM
To: [log in to unmask]
Subject: Re: [TN] Anyone at home?
Alright ....some of us are working.
Perhaps someone can help with a "low tech" question regarding the wiring boards used for wire harnesses.
Most users I visit have simple finishing nails nailed in to plywood to fix cable routing.
Recently I saw a user using a specialty nail with a rounded head and a nail end that was tapered. In addition they had approximately 1/2 way along the nails' length a landing pad that was a way to make sure that all of the nails were at the same height.
Anyone familiar with these nails? Looks like a specialty tool needs to be used to bang them in to a wiring harness board.
Thanks!
Happy 4th...remember to let go of the fireworks after you light them!
On Wed, Jun 29, 2016 at 9:50 AM, George Wenger <[log in to unmask]>
wrote:
> I am also here
>
> ----- Original Message -----
>
> From: "Victor Hernandez" <[log in to unmask]>
> To: [log in to unmask]
> Sent: Wednesday, June 29, 2016 10:03:51 AM
> Subject: Re: [TN] Anyone at home?
>
> I am here... It's been quite....
>
> Victor,
>
> -----OI am here....original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
> Sent: Wednesday, June 29, 2016 8:43 AM
> To: [log in to unmask]
> Subject: [TN] Anyone at home?
>
> No messages for 2 days
>
> Brian
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
--
Bob Wettermann
BEST Inc
[log in to unmask]
Cell: 847-767-5745
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|