Subject: | |
From: | |
Reply To: | |
Date: | Wed, 11 May 2016 07:33:11 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Victor - if you are conducting solderability test per either the IPC-
JSTD -002 or -003, the fluxes specified for testing are listed in one of
the Appendices by product name/supplier. The specifications also list the
flux chemistry constituents so that you can mix it yourself. One word of
caution -there are dozens of ROL1 fluxes on the market but they do not meet
the requirements of the JSTD specifications.
Dave Hillman
Rockwell Collins
[log in to unmask]
On Wed, May 11, 2016 at 7:26 AM, Victor Hernandez <
[log in to unmask]> wrote:
> Fellow TechNetters:
>
> Does anyone out there have a part number for the above solder type.
> Need to conduct bare board solder float test, 1x. 3x and 6x. Ten second
> intervals.
>
> Victor,
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|