TECHNET Archives

March 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Robert Kondner <[log in to unmask]>
Reply To:
Date:
Thu, 24 Mar 2016 12:58:20 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (75 lines)
Also,

 If you saw what came out of a MY600 jet printer you would never want to use a stencil again. Stencils are very fast though, I would not try serious production runs on a MY600. Though, if you did, your solder paste would be perfect, or at least very close.

Bob K.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Lawrence Dzaugis
Sent: Thursday, March 24, 2016 2:32 AM
To: [log in to unmask]
Subject: Re: [TN] TN] Auger Driven Dispensers

Assembling 3d circuit, one off circuits or unusually fabricated proto types.

Guy Ramsey <[log in to unmask]> wrote:
>You can add extra paste where needed when a step won't work.
>Rework where stencils are difficult or impossible.
>
>On 3/23/2016 3:20 PM, Ahne Oosterhof wrote:
>> Just curious, why would you use such a dispenser rather than a stencil?
>>
>> Ahne.
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Wettermann
>> Sent: Wednesday, March 23, 2016 6:55 AM
>> To: [log in to unmask]
>> Subject: [TN] Auger Driven Dispensers
>>
>> Gents/Ladies:
>>
>> We are looking at putting a non-pneumatic drive dispenser on a robot. Due to some pretty fine dots, the need for speed and for consistency and the need for some lines to be dispensed, we are looking at an auger-driven system (5-6 mil dots).
>>
>> Does anyone have favorite vendors of the dispensing pumps and controllers that can be added on to a pieces of automation equipment?
>>
>> Regards
>>
>>
>> _____________________________________________________________________
>> _ This email has been scanned by the Symantec Email Security.cloud 
>> service.
>> For more information please contact helpdesk at x2960 or 
>> [log in to unmask] 
>> _____________________________________________________________________
>> _
>> --
>> Bob Wettermann
>> BEST Inc
>> [log in to unmask]
>> Cell: 847-767-5745
>>
>> _____________________________________________________________________
>> _ This email has been scanned by the Symantec Email Security.cloud 
>> service.
>> For more information please contact helpdesk at x2960 or 
>> [log in to unmask] 
>> _____________________________________________________________________
>> _
>
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud service.
>For more information please contact helpdesk at x2960 or 
>[log in to unmask] 
>______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2