Hi Bob,
We have screen printers that will dispense epoxy or paste to your board after printing if needed (SpeedPrint). This works
Well for us but we are also looking into a bench top dispenser for our re-work department. We are looking at Fancort and
Nordson. They have some nice programmable models.

Regards,



Experience the benefits of Precision Engagement

Brien Bush
Manufacturing Applications Specialist
Phone: 603.249.9190  |   Fax: 603.249.9192
[log in to unmask]  www.cirtronics.com


ISO 9001 & 13485 Certified
Follow us on LinkedIn|Friend us on Facebook





-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Wettermann
Sent: Wednesday, March 23, 2016 9:55 AM
To: [log in to unmask]
Subject: [TN] Auger Driven Dispensers - Bayesian Filter detected spam

Gents/Ladies:

We are looking at putting a non-pneumatic drive dispenser on a robot. Due to some pretty fine dots, the need for speed and for consistency and the need for some lines to be dispensed, we are looking at an auger-driven system (5-6 mil dots).

Does anyone have favorite vendors of the dispensing pumps and controllers that can be added on to a pieces of automation equipment?

Regards


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
--
Bob Wettermann
BEST Inc
[log in to unmask]
Cell: 847-767-5745
WARNING: Export Control This message, including any attachments, may contain technical data within the definition of the International Traffic in Arms Regulations (ITAR), and subject to the Export Control Laws of the U.S. Government. Transfer of such information by any means to a foreign person, whether in the United States or abroad, without proper export authorization or other approval from the U.S. Department of State is prohibited.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________