TECHNET Archives

March 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Guy Ramsey <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Guy Ramsey <[log in to unmask]>
Date:
Tue, 8 Mar 2016 10:27:54 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (30 lines)
I have not, but with one wire nickel you might have a shot.  Tin the 
wire was a WS flux first, clean it and then see what you get.  I have 
only soldered J couples and then we are happy to bond it in a small 
"wad" of solder.
Good luck. I would be interested to know how it goes.


On 3/8/2016 8:14 AM, Bob Wettermann wrote:
> Morning All:
>
> Has anyone had success in soldering Type K Thermocouples to a PCB. The
> assembly call for a SAC305 no clean alloy....
>
> There are 2 THole connections that will need to be hand-soldered as part of
> this assembly.
>
> Thanks!
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2