TECHNET Archives

February 2016

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
X-To:
[log in to unmask]
Date:
Fri, 5 Feb 2016 04:22:38 -0600
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Nigel Burtt <[log in to unmask]>
Subject:
Re: developing thermal profile without a populated board
MIME-Version:
1.0
Message-ID:
<[log in to unmask]>
Content-Type:
text/plain; charset="utf-8"
Content-Transfer-Encoding:
quoted-printable
From:
Nigel Burtt <[log in to unmask]>
Parts/Attachments:
text/plain (4 lines) 
There are modelling software packages based on a 3D thermal profile of the PCB which gets you close to the profile you will need and then just needs some fine tuning once you have a PCB to play with. 

eg http://support.fluke.com/find_it.asp?SRC=DPQ&Document=9290428

ATOM RSS1 RSS2