TECHNET Archives

December 2015

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Nutting, Phil" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Nutting, Phil
Date:
Fri, 4 Dec 2015 17:57:32 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (1 lines)
Steve,

For some test box boards, low run of 3 or 4, we have used ExpressPCP and their free software.  www.expresspcb.com

I don't know how complicated the ExpressPCB software can go, but it will certainly work for what you are doing.

The price is very favorable.  I'm told the learning curve is not steep.

Our production stuff we do in PADs.  Hey, it is what we have used for ever.

Regards,

Phil

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Friday, December 04, 2015 12:32 PM
To: [log in to unmask]
Subject: [TN] Process guy looking to start trying to do board layout...

Hi All,

Many of you know me, and know that most of my career has been a hands-on,
out on the production floor kind of process guy , but now I'm looking at
trying to do board layout.

Yeah, yeah I know, forget about it. But I'm not looking to do anything
complicated, it's a small 1" X 2.85", 2-layer board with 3-LED's, a
through-hole right angle push button switch, 5-holes that a little wire
harness can be soldered into, and two mounting holes.

I've often thought about learning more about board design and layout, but
my plate always fills up with the day-to-day production and process issues
so I wind up pushing that off to the back burner and don't think about it
again for a while. So now the idea has popped up again. The story is that
we build this little board for a customer and now they want to change the
size and layout and use a different switch. So my boss asks me if this is
something I can do, we don't have any design guys here. I have Pentalogix
ViewMate Deluxe and do gerber edits to apertures in the solder paste layers
for the stencils I buy, but don't really change the layout of boards,
ViewMate is not meant for that. I explain that to him and he asks if he
bought the software would this be something that I would be interested in
doing, so now the opportunity has presented itself again.

So I've been looking around and I'm not looking the buy a seat at a
full-blown CAD station, just something inexpensive and simple to use. So
I've been looking at Eagle, and my question is, have any of you used this?
Is this software a good starting point for a rookie like me? I know there
is an IPC Designers Council forum, but those guys are so far ahead of me
that I don't want to waste their time. Any feedback is welcome.

Steve

-- 


This email and any attachments are only for use by the intended 
recipient(s) and may contain legally privileged, confidential, proprietary 
or otherwise private information. Any unauthorized use, reproduction, 
dissemination, distribution or other disclosure of the contents of this 
e-mail or its attachments is strictly prohibited. If you have received this 
email in error, please notify the sender immediately and delete the 
original. 


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2