Subject: | |
From: | |
Reply To: | |
Date: | Tue, 10 Nov 2015 15:30:09 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Leland,
This is covered in ANSI/EIA 481.
> On Nov 10, 2015, at 3:26 PM, Leland Woodall <[log in to unmask]> wrote:
>
> Folks,
>
> Is there a set of standards governing SMD component tape and reel packaging? I'm specifically interested in pocket dimensions for various sizes of chip resistors and two leaded diodes. We recently had Panasonic in to help with some process improvement items, and they seemed to think that a contributing cause to our inverted rejects was due to oversized pockets.
>
> Thanks in advance for your help.
>
> Leland
>
>
> ________________________________
>
> “Confidentiality Notice:
> This transmission (including any attachments) may contain confidential information belonging to the sender and is intended only for the use of the party or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, retention or the taking of action in reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender and erase all information and attachments.”
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|