Compunetics uses RBP Chemical Technology Inc. Magnastrip 500. My understanding is that there is a time interval during which mask is removed and the base material not degraded. Louis Hart

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: Friday, October 02, 2015 8:36 AM
To: [log in to unmask]
Subject: Re: [TN] Solder mask removal, SMOBC

Perhaps you can ask your board fabricator? I would imagine they have methods for doing this. Perhaps also they may be able to do it for you cheaper than you could set yourself up to do it? Doesn't hurt to ask.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Friday, October 02, 2015 6:52 AM
To: [log in to unmask]
Subject: [TN] FW: Solder mask removal, SMOBC

Fellow TechNetters:

   I did not receive very much feedback on my initial inquiry.   Therefore, I ask again.   Additionally I also ask if Solder mask and conformal coating the same Product/Term (IPC-7711.21  section 2.3.1.   I want to removal/strip solder mask.   At this point I do not known the solder mask vendor or type.

Victor,

From: Hernandez, Victor G
Sent: Thursday, October 01, 2015 10:56 AM
To: TechNet E-Mail Forum
Cc: Hernandez, Victor G
Subject: Solder mask removal

Fellow TechNetters:

   I have been asked to see if that is a satisfactory method for removing/stripping solder mask from sample coupons chemically and/or mechanically.

Victor,


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________