Subject: | |
From: | |
Reply To: | |
Date: | Mon, 12 Oct 2015 08:26:09 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
using additional material to improve the marginal design is
problematic usually in reliability, soon or later.
jk
On Oct 11, 2015, at 11:39 PM, Deng RongJun wrote:
> The PCBA will be assembled into housing with potting, and wires
> will be fixed well after assembly.
> Yes, the pad design need to be improved, such as that enlarge pad
> size to get more strength. But the PCB obviously have problem on
> some where.
>
>
>
> RongJun Deng
>
> -----Original Message-----
> From: Tan Geok Ang [mailto:[log in to unmask]]
> Sent: Monday, October 12, 2015 10:21 AM
> To: TechNet E-Mail Forum <[log in to unmask]>; Deng RongJun
> <[log in to unmask]>
> Subject: RE: Solder joint peel off from ENIG board
>
> First your pads design is not the same across the 3 points on the
> PCB, secondly the wire (high AWG) stressed the solder joints.
> Do tag/put adhesive/epoxy to hold the wires on the PCB so that the
> stress will be hold down at the epoxy area.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Deng RongJun
> Sent: Friday, 9 October 2015 4:14 PM
> To: [log in to unmask]
> Subject: [TN] Solder joint peel off from ENIG board
>
> Hi all:
>
>
> I have got a solder joint strength issue on ENIG board, the cables
> soldered on board can be easily detach from pads by a small
> external force(1kg), the cable mounting process is hand soldering.
> Failure rate is about 20%.
>
>
>
> We have made SEM and EDS test for solder joint and peel off
> surface, P Wt% is high than normal. And we have also made SEM test
> for 10pcs bare board, the Au thickness is 0.038-0.05um, Ni
> thickness is 2.8-4.0um.
>
>
>
> As I know high P Wt% will affect solder joint strength, what issue
> is happened during PCB fabrication process? Anybody know anything
> about this?
>
> Here comes pictures:
> http://pan.baidu.com/s/1sjl7Ynb
>
> Best regards
> Deng
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|