Hi Adrian
Here is a link to some simple articles I wrote on design for conformal
coating robotically, valve selection etc. they may help you make the right
choice if you decide to go down that line.
http://www.nexus3c.com/default.asp?iId=EJLMGDM
Best Regards
Dr Lee Hitchens
SCH Technologies is a Division of SCH Services Limited
Mob: +44 (0) 7862 25 33 21
www.conformalcoating.co.uk <http://www.conformalcoating.co.uk/>
TECHNICAL SUPPORT SERVICE
SCH Services Ltd offers a Technical Support Helpline to help address all
issues relating to reliability. This includes contamination testing,
cleanliness and cleaning issues, plus any coating related questions.
Please contact us via email or telephone:
[log in to unmask] +44 (0)1226 249019 (office hours & answerphone)
+44 (0)7862 253321(out-of-hours emergency)
The opinions expressed in this e-mail are strictly those of the sender and
not of SCH Services Limited. This communication may contain information
which is confidential and may also be privileged. It is for the exclusive
use of the intended recipient(s). Unauthorised use, copying or disclosure
of any of it may be unlawful. If you are not the intended recipient(s)
please note that any distribution, copying or use of this communication or
the information in it is strictly prohibited. If you have received this
communication in error please notify us by e-mail or by telephone (+44
(0)1226 249019) and then delete the e-mail and any copies of it. Virus
Warning - Although steps have been taken to ensure that all email and
attachments are virus-free, we cannot guarantee nor be held liable.
Company Registration: 04043334
Registered office: SCH Services Limited Newburgh Building McLintock Way
Barnsley South Yorkshire S70 6BF
On 03/09/2015 20:57, "Ioan Tempea" <[log in to unmask]> wrote:
>Hi Adrian,
>
>Although I concur with our colleagues that, for your volumes,
>masking/spraying should be reliable and cost effective, it seems that
>your original question has not been answered. So here's, in my personal
>order of preference, a list of selective coating equipment manufacturers:
>http://www.pva.net/
>http://www.nordson.com/en-us/divisions/asymtek/pages/default.aspx
>http://www.nordsonefd.com/ca/
>
>PVA and Asymtek provide full size and capability machines, whereas EFD
>might help with one of their tabletop robots.
>
>They all provide precious info on equipment and valve selection, related
>to your application. They can also develop the process you need and
>provide you with an optimized program.
>
>Best regards,
>
>Ioan Tempea, P. Eng.
>Manufacturing Engineer, Satellite Systems
>
>MacDonald, Dettwiler and Associates Corporation, 21025 Trans-Canada
>Highway, Ste-Anne-de-Bellevue, QC, Canada H9X 3R2
>Tel: +1-514-457-2150 x3556
>www.mdacorporation.com
>
>This e-mail, and any attachments, are intended solely for the use of the
>intended recipient(s) and may contain legally privileged, proprietary
>and/or confidential information. Any use, disclosure, dissemination,
>distribution or copying of this e-mail and any attachments for any
>purposes that have not been specifically authorized by the sender is
>strictly prohibited. If you are not the intended recipient, please
>immediately notify the sender by reply e-mail and permanently delete all
>copies and attachments. This email is for informational purposes only and
>shall not be interpreted to authorize or conclude a binding agreement
>between MDA and any other party unless this email contains or is
>accompanied by an express written confirmation of MDA's intention to
>enter into a binding agreement, such confirmation shall only be provided
>by an authorized representative of MDA.
>
>
>-----Message d'origine-----
>De : TechNet [mailto:[log in to unmask]] De la part de Adrian Dimulescu
>Envoyé : Thursday, September 03, 2015 10:39 AM
>À : [log in to unmask]
>Objet : [TN] Selective Conformal Coat Systems
>
>Hello All,
>
>We're looking into purchasing a small (bench-top type) automated
>selective conformal coat system. This will be used for 100 or so boards
>a week, therefore speed is not an issue. It is important that the system
>is selective as we only want to coat specific areas on the board. I
>wanted to get a feel for what other are using and/or recommend.
>
>Many Thanks
>
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud service.
>For more information please contact helpdesk at x2960 or [log in to unmask]
>______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
