TECHNET Archives

August 2015

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Gregory <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Steve Gregory <[log in to unmask]>
Date:
Fri, 21 Aug 2015 09:06:34 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (58 lines)
Hi Graham,

I've used these for years:

http://www.hunterproducts.com/Micro-Metallizer%20Catalog%20-%20Page%201.pdf

They have everything you need, power supply, cleaning pens, nickel pens,
and gold pens. Make sure you remove all the solder, careful scraping is
best.

Steve

On Fri, Aug 21, 2015 at 5:19 AM, Graham Collins <[log in to unmask]>
wrote:

> Good day Technet
> I've got some 20 boards that were badly taped and have solder on the gold
> fingers.  Aaarrrggg!!!
>
> So I know it is possible to get a kit with the chemicals and gear to allow
> re-plating the fingers, we are looking at it but my questions are:
>
> 1) what is the best kit, does anyone have a recommendation (or warning)?
> 2) does anyone offer this as a service?  I've only got the 20 boards like
> this, the cost per board will be fairly substantial and this has not
> historically been a recurring issue.
>
> --
> regards,
>
> Graham Collins
> Senior Process Engineer
> Sunsel Systems
> (902) 444-7867
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>

-- 


This email and any attachments are only for use by the intended 
recipient(s) and may contain legally privileged, confidential, proprietary 
or otherwise private information. Any unauthorized use, reproduction, 
dissemination, distribution or other disclosure of the contents of this 
e-mail or its attachments is strictly prohibited. If you have received this 
email in error, please notify the sender immediately and delete the 
original. 


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2